The only in-house DIY system for making your own real dry-transfer, rub-down images on-demand in minutes using any laser printer or copier.
Get the same high quality images as expensive "send-out" commercially made transfers at a fraction of the cost, and do it in your shop in under 10 minutes. A most powerful graphics & text capability. Your images can transfer to all textured, flat or curved surfaces... even transfer to a soft wax candle. Website: DecalProFX.com
The only 8 minute PCB fabrication system for making quality, high-resolution Single & Double-sided PCBs with trace pitch down to .005" using basically any B&W laser printer or photo-copier
• No Negatives, Developing Chemicals or Darkroom
• Single & Double-sided Boards w/1/2oz CU for 1 minute etching
• Rigid .032" and FlexBoard .005" super-flexible circuit boards
• Traces down to .005" for all SMT board designs
Colorize any laser or copier printed page with unique metallic, pigment and special effect foils.
• Website loaded with tricks that no one else has the experience to tell you about
• Overlay multiple foil shades for amazing composite designs
• Full Tech Support by phone and email
"Chemical Milling" using the Direct Etch technique
Using any laser printer or photo-copier, Toner Transfer Paper and GreenTRF foil you can etch all the way through brass or copper shim to create 3-D objects or etch-relief to any depth to create extremely intricate images in brass, copper and silver.